CON-260/260L大型預縮定型機
種類 | 縮水機 | 用途 | 縮水定型設備 |
自動化程度 | 全自動 | 作用對象 | 面料 |
適用面料 | 其他 | 產品類型 | 全新 |
品牌 | 鸕鶿 | 型號 | CON-260/260L |
產地 | 廣州 |
CON-260/260L大型預縮定型機
Large Sized Shrinking And Forming Machine
標準配備:
- CON200-270系列機型均分為:加濕預熱區,干燥區和冷卻定型區,都以輸送帶連貫每一個裝置。
- 自動送布裝置:讓原布與傳送帶之間保持一定垂弧,使原布在無張力狀態下傳送。
- 緩和裝置:布料被蒸汽濕潤后及振動松弛,此區可將布料完全軟化。
- 吸風罩裝置:吸收加濕區的殘留蒸汽,使工作場所環境清新。
- 加熱裝置:上下兩端采用電加熱熱風循環,對于加工困難的化學纖維產品也能得心應手。
- 冷卻裝置:采用強力吸風冷卻系統,可使布料完全冷卻及安定。
- 卸布裝置:通過靚臂擺動將布料來回折疊整齊。
- 計碼器:進口計碼器,精確測量布長及縮率。
The machine includes:
- A wetting &pre-heating zone,drying zone and cooling zone which are connected by conveying belts for all CON series.
- Afabric auto-feeding & release unit:fabric can be released & conveyed without any tension under a radian between the feed fabric and unit.
- A dampening unit:fabric is softened via a vibrator after being moist urized in this unit.
- A moisture-suction unit:it sucks the leftover steam from the wetting zone to make a better working environment.
- A heating unit : it is an electrecally driven unit with hot air circulation on bothsides. This unit can also handle chemical fiber fabric well.
- A cooling unit : fabrie can be cooled thoroughly with a powertul air suction cooling system.
- A collecting unit : shrunk fabric is folded neatly through a rocker arm.
- A metering unit : fabric length and shrinkage rate is meacured accuratelyvia the imported metering unit.
型號 Model | 預縮寬度 Max. Fabric With (毫米MM) | 蒸汽消耗量 Steam Consumption (公斤/小時kg/hr) | 加工速度 Progressing Speed (米/分鐘m/min) | 電壓 Voltage (伏特Volt) | 功率 Power (千瓦kw) | 最大蒸氣壓力 Max. Steam Pressure (巴bar) | 機身尺寸 Machine Size (毫米mm) |
CON-260 | 1850 | <200kg/H | 0-15m/min | 380V 50Hz | 24 | 4-7 | 6500X2830X1400 |
CON-260L | 2100 | <250kg/H | 0-15m/min | 380V 50Hz | 26 | 4-7 | 6500X3080X1400 |